: Lots of car owners hire providers of bumper repairs in Sydney Australia to remove small dents from their vehicles. Nothing can be more annoying than having a dent on a newly-bought car. Even when you drive carefully, you cannot always avoid wrongly parked vehicles, falling pebbles, or pine cones that hit your vehicle when on the road. As getting a dent eliminated by experts can sometimes be a bit costly, most car owners never think of fixing them.

Nevertheless, dents, particularly small ones, are worth being concerned about. There are lots of ways to eliminate them from your vehicle by utilizing basic household items like a vacuum cleaner, plunger, or aluminium foil. Not all of these methods will work well for you, so you must decide the one that will be best for your own car.

1. Use a hairdryer to remove a dent

Find and gauge the dent. Then get these household items: aluminium foil, a can of compressed hair, pair of rubber-coated gloves, package of dry ice, and a hairdryer. Use the hairdryer at about six inches from the surface of the car to heat the dent. Then use a piece of aluminium foil to cover the dent. Put the rubber-coated gloves on to safeguards hands from all injuries. Rub your dry ice over the dent-covering aluminium foil. Also, you could use liquefied compressed air to cool the dented area. The rapid temperature change, which is the principle used by providers of bumper repairs in Sydney, will cause the dent to pop out, which will most probably happen after the very first minute.

2. Utilize a plunger

Plungers are magic tools. Aside from unclogging toilets, they could also be utilized for a few other purposes. If the dent on your car isn’t too large, it could be easily eliminated using a plunger. All you need do is pour some amount of water over the dent and the plunger. Begin to push the plunger up and down. Keep repeating this a couple of times till the dent eventually pops out.

3. Use boiling water to fix a bumper dent

This technique works well for dents on parts of a car made of plastic as well as plastic bumpers. Boil one pot of water then pour it over the area of the bumper with the dent. Then, reach to the back of the bumper and pop out the dent. Also, you might have to take the bumper off if you can’t reach the dent. Lastly, pour one pot of cold water onto the dent for the plastic area to cool and fix.

4. Utilize a bucket and vacuum cleaner

Create a small hole on the bucket’s bottom. Use the bucket’s upper part to cover the dent. Then, put the tube of the vacuum cleaner over the hole in the bucket’s bottom, then turn on the vacuum cleaner and wait for the dent to pop out.

In concluding, know that if the dent is big, or has brought damage to your car’s metal, there’s no way of repairing unless to call in providers of professional bumper repairs in Sydney Australia. They are always available and ready to help you.