Owning a hot tub at home is a splendid pleasure, but they are pricey products that require special maintenance. They won’t last nearly as long as you might hope if the necessary maintenance duties are neglected.

Here are some top tips for hot tubs maintenance suggestions to assist you in remembering what you need to do if you’re seeking advice on how to take care of your tub.

Suggestions For Cleaning Your Hot Tub

1. Circulate Water

Circulate the water in your hot tub between one and two times each day to keep it clean. 

For this purpose, now one can buy advanced hot tubs with a circulation system feature inbuilt which turns on automatically twice every day. If you don’t have one of these, you’ll have to manually start the water circulation each day in order to maintain the water’s cleanliness.

2. Pick Any Larger Debris With Your Hands

Picking out any larger debris that falls into your tank by hand is another simple approach to know that your filters continue to function at their best.

Yes, the filters are intended to remove this debris, but if you leave larger residue or twigs, the filters can get clogged. Further, you’ll discover that you need to clean or even replace the filters much more frequently.

3. Inspect The Filters

Make sure the filters are in good condition because they are one of the main elements that keep the water –  clean and hygienic.

Create the routine of taking the filters out every two weeks to visually inspect them to make sure they are undamaged. Any larger particles of trash that have gotten lodged in the  hot tub filters can now be manually removed.

Even needed monthly cleaning for better functioning and hygiene. Try an overnight soak or a more cursory monthly clean that involves dusting them down and cleaning them with filter cleaner.

Suggestion: Cheap hot tubs may have cheap filters. So, do check filters and other features beforehand.  

4. Examine the Water

Hot tubs water needs to be closely monitored; the proper pH, alkalinity, sanitizer, and other levels must all be maintained.

By frequently monitoring the water with a kit, which should be done at least once a week, you can only ensure that all the chemical parameters are balanced.

Expert Suggestion: You must correct your bathtub’s alkalinity if you discover that it is off. The alkalinity range should be between 80 and 120 ppm. Add sodium bisulfate to lower it if it climbs above 120 and sodium bicarbonate to boost it if it drops below 80. After making the correction, wait a few hours before taking another reading to make sure the water is where it should be.

5. Ensure Sanitation

The water in your tub has to be cleaned since stagnant water is a breeding ground for bacteria.

Today, bromine is the preferred choice, but chlorine is still in use. A floater can be used to dissolve these substances into the water. As for the sanitization use of germ-killing liquids, be sure to adhere to them.

Set a schedule and follow it.

Wrapping Up

You should consider that there are many things to keep in mind when it comes to hot tub maintenance, and the only way to remember them all is to be thorough and systematic. Utilize your phone, an app, or a calendar, but make sure you have a system of reminders and that you follow it!

Pro tip- During the coldest months, winterize the tub if you won’t be using it.

To fully winterize the tub, you must remove any water from the pipes, jets, and any other areas where it may be present if you intend to leave it empty while you are gone for a while. If the process is not done properly, pipes will get cracked and split, resulting in heavy loss. Hence, you have to put a board for a hot tub for sale in such a situation.