Choosing the right irrigation pump in Australia is crucial when it comes to meeting your irrigation needs. The right irrigation water pump ensures that you meet your water requirements for your crops and provide the best efficiency. This will ensure that you get the most out of your investment. Here are some tips for choosing the right irrigation water pump.

Understanding the basics

There are different types of techniques used for irrigation you can use for your farm. However, the aim is the same; pumping water from sources and distributing it evenly within your farm. The main aim is to keep your energy needs low and ensure that your plants get adequate amounts of water. Your plants don’t need less or excess water.

You can use modern irrigation techniques to meet these goals and use the right water pump. The entire cultivable land should be divided into small regions known as zones to ensure uniform irrigation. You can segregate your zones based on the type of soil, the crops and your irrigation requirements. Each zone is watered using tubes, pipes, valves, and sprinklers which are connected to a pump.

The field is divided into zones because one sprinkler cannot produce enough pressure to irrigate the whole area at a time. You will need an irrigation controller to turn on and off your sprinklers in particular zones at a specific time.

Choose your irrigation equipment

When choosing an irrigation pump and irrigation equipment, you should understand that different equipment requires different amounts of pressure and water. It is, therefore, important to choose the equipment before choosing your pump. Make sure you consider the controller when choosing your irrigation equipment.

Controllers play an important role in turning on and off the water supply at specified periods during heavy winds, rains and direct sunlight. Controllers are responsible for conserving water. It turns the pump off at a preset time. This makes the water to seep into the soil adequately and reduces infiltration and runoff.

Nowadays, people are using smart controllers. These devices use data like weather, humidity, soil, rain and moisture to determine the water requirements for your plants.

Consider the type of water source

You need adequate access for water if you want to have successful irrigation. Water was considered to be an infinite resource a few decades ago. The situation has reversed today and there is a shortage of water in many parts of the world. This means that you should take the right steps to ensure that you manage your water efficiently.

Some of the common sources of water for irrigation include wells, bore wells, springs, rivers, surface water runoff, and desalinated water and so on.

Choose a suitable pump

The location of your source of water plays an important role in choosing the right type of irrigation pump in Australia. Deep well submersible pumps and turbine pumps are suitable at drawing water from wells, boreholes and deep underground. You can use different types of pumps when it comes to surface water. Submersible pumps are not visible and this reduces chances of theft.